Book a Survey:

0800 002 9370

Mobile Repair Service:

07883 794 890

Products by Manufacturer:

Site Search

Buy Online with peace of mind...

We have chosen a highly secure shopping cart supplier for your safety and peace of mind. We accept:

Garage Door Spares | Garage Door Automation | Garage Door Fitting | Garage Door Repairs | Awnings | Canopies | Shutters

Home > Spares > Spares By Manufacturer > Cardale > Handles

Cardale cast Brass garage door handle

Spare or replacement Eurolock, Brass body complete with Brass barrel. Brass plated Eurolock body fitted with 75mm spindle complete with Brass barrel and 2 keys. Supplied with 2 off M6 x 55mm slotted pan head screws and washers for fitting. Fits All steel & Single Heritage doors. Cardale Code AZAD 1015B

£59.95

Stock No: CAS2094

Replacement Pattern Handle (Looks same as the image but without the Cardale Name on it). Available with Short (CAS2000), Medium (CAS2090) and Long (CAS2092) Spindle (choose the length in the shopping cart).

£45.95

Stock No’s Above

Cardale Black garage door handle

Cardale Flush garage door lock

Flush lock with black body and plastic moulded pull handle. 75mm spindle and 2 keys

High security lock to replace all "T" locks with 75mm spindles

Supplied with 2 off M6 x 55mm pan head screws for fitting

NOTE: For doors fitted with a steel lock plate on the back it may be necessary to cut down the lock spindle.

Cardale Code: AZAD 1050

£54.95

Stock No: CAS2056

Cardale Eurolock Handle and Spindle

Spare or replacement Eurolock Handle & Spindle. Circlip included for easy replacement. Eurolock moulded handle available in 3 spindle lengths: 65mm (CAS2081) 75mm (CAS2082) 93mm (CAS2083).

(Choose the one needed in the shopping cart).

£29.95

Stock No’s above.

Cardale Mk1 Style garage door handle

A black powder coated "T" locking handle with short spigots and a 85mm (3 3/8") long 90 degree shaft. Suits Cardale Mk1 twin spring drum, Mk2 and Mk3 central spring drum, Compact torsion sprung and pre CD45 overhead geared single doors and all single and double slideaway doors with "T" handle as opposed to euro-locking.

Spindle can be cut to the required length.

£19.95

Stock No: CAS2010

Fitting Instructions

General guide for fitting a garage door handle:

1. Open the door.

2. Take a picture with your mobile phone of the back of the handle to help you remember where each part should be.

3. Remove the screws holding the handle in place - usually a flat head is required for this.

4. Go outside with the new handle and partially close the door.

5. Pull the old handle out and replace with the new handle.

6. Open the door fully again.

7. Refix the handle with the screws.

8. Check the latches are working buy closing the door from the inside. If not adjust them now.

9. From the outside close the door and lock and unlock it to be certain all is done properly.